Leading 10 usual forklift accidents ， forklift procedure should take note of these matters ！.
Leading 10 usual forklift accidents ， forklift procedure should take note of these matters ！.
Blog Article
Do not take too lightly the forklift at work. If the procedure is not good, there will be significant accidents in minutes, and there are several accidents involving forklifts.
Instance 1: The forklift freight obstructed the vehicle driver's sight, and the individual ahead could not be discovered, resulting in a moving crash.
Instance 2: In order to preserve the equilibrium of the forklift when raising heavy items, the staff members used their body weight as the weight, which virtually created casualties.
Case 3: The width of the forklift freight exceeds the allowed width of the path and hangs on the roadside rack, which almost creates an accident.
Instance 4: Forklift is speeding up and rolls over during a turn.
Situation 5: The forklift chauffeur did not discover the pedestrian, and the pedestrian did not see the forklift.
Case 6: The forklift raises the personnel unlawfully, the forklift driver does not wear the seat belt, the forklift lifter drops and the vehicle driver is crushed when the forklift surrender.
Situation 7: The forklift driver did not wear a seat belt and fell from the vehicle when it rolled over and was squashed.
Forklift operation should focus on these matters ：.
Beginning.
1. Before starting, observe the environments, and after verifying that there are no barriers that hinder the safety of driving, honk the horn initially and afterwards begin.
2. For lorries with hydraulic ( atmospheric pressure) brakes, the brake hydraulic pressure (air pressure) scale have to be safe before beginning.
3. When the forklift starts with a tons, the motorist needs to initially confirm that the load is steady and dependable.
4. The begin should be sluggish and steady.
Driving.
1. When driving, the elevation between the bottom end of the fork and the ground must be kept at 300mm-400mm, and the mast should be slanted backwards. .
2. Do not raise the fork too high when driving. When entering and leaving the work website or while driving, be careful that there will certainly be no barriers in the sky. When the lots is taking a trip, the fork should not be elevated expensive, which will certainly impact the security of the forklift. .
3. After dumping, the fork should be reduced to the normal driving placement prior to driving. .
4. When transforming, if there are pedestrians or lorries close by, the driving signal must be issued initially. High-speed sharp turns are forbidden. High-speed doglegs will trigger the lorry to lose lateral stability and topple. .
5. When the forklift is downhill, it is purely forbidden to switch off the flame and slide, and it is restricted to brake suddenly while driving with loads unless there are special scenarios.
6. When the forklift is running, it has to obey the traffic rules in the factory and should keep a specific security range from the lorry ahead. .
7. When the forklift is running, the lots has to remain in the most affordable placement that does not prevent the driving, and the gantry should be properly tilted back. The load will not be elevated other than when piling or filling. .
8. The elevation of the tons need to not block the vehicle driver's view. In unique conditions, when the thing impacts the forward vision, drive at a low speed when reversing.
9. It is forbidden to turn on the ramp, neither to drive throughout the ramp. .
10. The risk-free driving speed of the forklift in the factory location is 5 km/h, and it has to drive securely at a low rate when entering the production workshop area. .
11. When the forklift is raised, raised or driven, it is prohibited for workers to stand on the fork to hold things and play a stabilizing function. .
12. If problems are found, they will certainly be repaired and reported in a timely fashion, and they will certainly never run with health problems or conceal them.
loading and dumping.
1. When fork-loading products, the distance in between the two forks should be readjusted as needed to make the load of both forks balanced and not manipulated, and one side of the product should protest the rack. .
2. It is restricted to collaborate with a solitary fork or utilize a fork top or pull. In unique situations, safety indication must be established to remind bordering pedestrians. .
3. In the process of loading and dumping items, the forklift has to be braked with the brake. .
4. The rate of the car need to be slow-moving and stable. Be careful not to roll the wheels on the dunnage, so as not to extend the rolled items and harm individuals. .
5. When using a fork to fork the goods, the fork needs to be as deep as possible under the tons, and it should be noted that the fork pointer ought to not touch various other goods or items. The lots ought to be supported with minimal back tilt of the gantry to ensure that the lots does not slide backwards. The pole can be slanted forward somewhat when the lots is lowered to enable very easy placement of the load and removal of the forks. .
6. It is restricted to fork goods at high speed and hit tough objects with the fork head. .
7. When the forklift is working, it is prohibited for individuals to stand around the fork, so Stand-on Electric Pallet Stacker regarding stay clear of the collapse of the goods and hurt people. .
8. Overwhelming is forbidden, and it is prohibited to use forks to lift workers to take part in high-altitude procedures to stay clear of high-altitude falling accidents. .
9. It is not enabled to utilize the brake inertia to slide, place, round or roll things. .
10. It is not permitted to make use of forks to pick, transform pallet discharge.
Leaving .
1. It is restricted to leave the forklift when the things on the fork impend. Prior to leaving the forklift, you must unload the goods or lower the fork frame.
2. Pull the parking brake deal with to dead or depress the parking brake switch.
3. The engine is turned off and the power is cut off. (Except for special circumstances, such as the driver does not leave the vehicle's line of sight and does not exceed 1 minute).
4. Get rid of the trick. .
Forklift Operation Precautions.
1. Prior to and after the forklift procedure, the look ought to be inspected, and fuel, lubricating oil and air conditioning water need to be included.
2. Inspect the security performance of Electric Forklift Truck for Warehouse starting, running and stopping.
3. Inspect whether the lights and horn signals are total and effective.
4. During the procedure of the forklift, examine whether the pressure and temperature are normal.
5. After the forklift is running, the exterior leak must likewise be checked and the seals should be changed in time.
Forklift Safety Operation Specifications.
1. You need to inspect before leaving the car;.
2. When you run into somebody in front of you throughout driving, you must send a signal at a distance of 5 m;.
3. The driving rate in the manufacturing facility does not exceed 5 km/h;.
4. When driving, the nadir of the cargo should be 0.3 m ~ 0.4 m in the air;.
5. The turning should not be also sharp to avoid the tendency of " cost-free switching";.
6. Running up and down the incline ought to be slow-moving and uniform, and no turning on the incline is allowed.
7. Do not drive throughout the gradient. When the slope is greater than 10%, the lorry ought to be driven in reverse when declining;.
8. When the forklift employees bring the goods and move forward, if they come across large or hefty items and go to the vehicle driver's line of vision, they need to take the reversing workout
.
The "Eight Prohibitions" should be complied with in the procedure.
1. Single fork procedure is not allowed.
2. It is not enabled to raise the goods for long distance driving.
3. It is not enabled to grab the goods by turning over the pallet with the fork.
4. It is not enabled to straight shovel chemicals, flammables and other harmful chemicals with forks.
5. It is not permitted to use inertia force to grab the goods.
6. It is not allowed to utilize stopping pressure to exile round or easy-to-roll items.
7. It is not permitted to bring people to deal with the pallet or fork, and it is purely restricted to stand under the fork after the fork is raised.
8. Do not drive laterally on inclines
.
Parking is not permitted under the following problems.
1. Contours, slim roadways, railway crossings;.
2. Sections with a longitudinal slope above 5%.
3. When there is an barrier on one side of the roadway, the contrary side of the area with the same length as the challenge must be within 20 meters at each end.
Web：https://www.onenforklifts.com/
Email：info2@onen.cn
Phone：+86 13827083844